Workshop Manuals Factory service & repair Fiat
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)09 · 55 Electrical system
09 · Electrical

Fuse and relay unit

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Fuse relay and control units › Fuse and relay unit
55 Electrical systemFuse and relay unit · page 1 of 2
Diagram showing the location of two screws on a triangular dashboard trim panel, with arrows indicating the screw positions.

FUSE AND RELAY UNIT

Removing-refitting

  1. Undo the screws indicated and remove the unit cover.
  2. Disconnect the wiring connectors plugged into the front of the unit.
  3. Undo the screws securing the unit to the dashboard.
  4. Move aside the unit, disconnect the connectors plugged into the rear of the unit and remove the unit from the dashboard.
Diagram showing the fuse and relay unit behind the removed trim panel, with wiring connectors attached to its front face.
Diagram showing the fuse and relay unit secured to the dashboard structure, with arrows pointing to the securing screws and the wiring harness connected to the rear.

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.