Workshop Manuals Factory service & repair Fiat
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)09 · 55 Electrical system
09 · Electrical

Removing-refitting

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Instrument panel › Removing-refitting
55 Electrical systemRemoving-refitting
Diagram showing the location of screws on the side of the instrument panel and a hand removing a component from the lower section near the pedals
Diagram showing the instrument panel with arrows indicating the locations of the outer screws securing the control panel frame around the gauges and steering wheel
Diagram showing the control panel frame being withdrawn, with arrows pointing to the connectors for the lighting rheostat and headlamp adjustment rheostat at the rear of the unit

REMOVING-REFITTING

  1. Remove the protective cover from the fuse and relay unit. Undo the outer screw securing the control panel frame.
  2. Undo the outer screws securing the control panel frame.
  3. Withdraw the panel frame after disconnecting the two connectors from the panel lighting rheostat and headlamp adjustment rheostat (arro)ed).
  4. Undo the screws securing the instrument panel to the dashboard.
  5. Disconnect the instrument panel wiring connections and remove it from the car.
Diagram showing the instrument panel cluster with arrows indicating the screws securing the panel to the dashboard structure behind the steering wheel

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.