Workshop Manuals Factory service & repair Fiat
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)09 · 55 Electrical system
09 · Electrical

Side repeater

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Lighting › Side repeater
55 Electrical systemSide repeater
Diagram showing a side repeater lens being pulled from the body panel, with an icon indicating removal and refitting directions.
Close-up diagram of the side repeater assembly, showing the bulb holder and lens connection.
P4A024L01 P4A024L02

SIDE REPEATER

Removing-refitting

  1. Use a screwdriver at the point shown by the arrow to disengage the side repeater from the body shell.
  2. Disconnect the supply cables connector from the bulb holder, and rotate the holder to release it from the lens.
Diagram of the rear crossmember trim area, with arrows indicating the locations of screws and buttons securing the trim.

REAR LIGHTS CLUSTER

Removing-refitting rear lights cluster (3-door version)

  1. Undo the screws and remove the buttons securing the rear crossmember trim and remove the trim.
  2. Undo the screws (arrowed) and remove the lights cluster trim.
  3. Undo the nuts indicated and remove the lights cluster from its seating.
Diagram showing the rear lights cluster removed from its seating, with arrows pointing to the mounting nuts.
P4A024L03 P4A024L04 P4A024L05

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.