Control buttons in the dashboard
- Make
- Fiat
- Model
- Bravo /Brava (182) Factory Service Manual
- Year
- 1995–2001
- Section
- Various devices (98 range) › Control buttons in the dashboard
CONTROL BUTTONS IN THE DASHBOARD
- Front fog lights (where fitted);
- Rear fog lamps;
- LED signalling "alarm on" (where fitted);
- Button for switching heated rear windscreen on/off;
- Button for outside temperature display
- Button for switching hazard warning lights on/off
ENGINE OIL LEVEL CONTROL UNIT
| PIN No. | 12 way connector |
|---|---|
| 1 | Key |
| 2 | + Battery |
| 3 | GND |
| 4 | Sensor earth |
| 5 | Sensor positive |
| 6 | Outlet for warning light |
| 7 | Spare |
| 8 | Test |
| 9 | Magneti Marelli Test |
| 10 | Spare |
| 11 | Spare |
| 12 | Spare |
The 1919 JTD version is fitted with a warning light signalling the engine oil level operated by a control unit located behind the glove compartment.
The warning lights in the instrument panel carry out a self-test lasting about 2 seconds when the ignition is switched on.
If the engine oil level is below the minimum level, the electronic control unit switches on the warning light for 30 seconds at a frequency of 2 Hz.
In the case of a sensor short circuit or open circuit, there will be a signal consisting of 2 flashes at a frequency of 2 Hz, a pause of 2 seconds and 2 flashes at 2 Hz with the cycle repeated 10 times in 30 seconds.
With the voltage below 8.5 V, the control unit displays the engine oil level memorized at the last reading via the warning light.
With the engine oil level below the minimum level, the warning light remains on constantly for 30 seconds.
Parts & tools for this job For 1995 Fiat Bravo
- TOOLDigital multimeterSearch: automotive digital multimeter
- PARTAssorted fuse kitSearch: car fuse assortment kit
- TOOLWire crimper and connector kitSearch: wire crimper connector kit
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.