1. Tooling

ESSENTIAL : Observe the safety and cleanliness recommendations.

1. Tooling

Equipment : Diagnostic station.

2. Removing

Disconnect the battery.

Remove the ABS/ESP hydraulic valve block.

Figure : B3FP7N0D

Remove :

• The bolts (1)
• The ABS/ESP ECU (2)

3. Refitting

Figure : B3FP7N1D

Refit :

• The ABS/ESP ECU (2) (on the hydraulic valve block (3))
• The bolts (1)

Pre-tighten to 1,75 ± 0,25 N.m.
Tighten to 3 ± 0,3 N.m.
Refit : The ABS/ESP hydraulic block.

CAUTION : Perform the operations to be carried out following reconnection of the battery.

Reconnect the battery.

Bleed the brake system.