Parking brake: adjustment (page 2 of 2)

Figure : C5DP07JD

Loosen the locknut (3b).

Screw the nut (3a) until the lever (4) lifts slightly off the stop (5).

Tighten the locknut (3b).

CAUTION : Respect the tightening torque for the nut (1).

Tighten :

• The handbrake to the 6th notch
• The nut (1) to 1,5 m.daN

Pull the parking brake lever firmly 4 to 5 times.

Position the handbrake to the 6th notch.

Tighten the nut (1) to 1,5 m.daN.

Check that the rear brakes are applied.

With the handbrake released, check that the wheels can be turned freely by hand.

Refit the rear wheels.

Return the vehicle to its wheels.

Tighten the wheel bolts [i icon].