Workshop Manuals Factory service & repair Fiat
Fiat Ducato Mk3 (250) Factory Service Manual (2006-2017)02 · 02 Brakes - 3.0 HDi
02 · Brakes

1. Tooling (page 2 of 2)

Make
Fiat
Model
Ducato Mk3 (250) Factory Service Manual
Year
2006–2017
Section
Pedal bracket: removing - refitting
02 Brakes - 3.0 HDi1. Tooling · page 2 of 2
Diagram showing the pedal bracket area with callout number 2 pointing to two nuts on a horizontal bar and one nut on a lower component.

Figure : B3FP7MHD

Remove the nuts (2).

Two diagrams labeled A and B showing the pedal bracket assembly. Callout 3 points to a nut, 4 to a strengthening tube, and 5 to a bolt. Diagram A shows left-hand drive configuration, Diagram B shows right-hand drive.

Figure : B3FG29DD

Fitting A : Left-hand drive.

Fitting B : Right-hand drive.

Remove :

  • The nut (3)
  • The (5) bolt
  • The strengthening tube (4)

Disconnect the connectors.

Diagram showing a connector being disconnected from the pedal assembly. An inset circle shows a close-up of the connector with callouts 'a' and 'b' indicating release tabs and callout '6' pointing to the connector body.

Figure : B3FP7MKD

Parts & tools for this job For 2006 Fiat Ducato

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.