Workshop Manuals Factory service & repair Fiat
Fiat Ducato Mk3 (250) Factory Service Manual (2006-2017)05 · 05 Steering - 3.0 HDi
05 · Steering & suspension

1. Removing

Make
Fiat
Model
Ducato Mk3 (250) Factory Service Manual
Year
2006–2017
Section
Steering lock: removing - refitting › 1. Removing
05 Steering - 3.0 HDi1. Removing · page 1 of 2

ESSENTIAL : Observe the safety and cleanliness recommendations.

1. Removing

Disconnect the battery.

Remove the controls at the steering wheel (see the relevant operation).

A photo showing a hand using a punch and hammer to slacken screws on a steering lock assembly, with callout number 1 pointing to the screws.

Figure : C5FP020D

Slacken the screws ( 1 ); Using a punch and a hammer.

A photo showing the steering lock assembly with a blue circle highlighting the transponder sensor area, with callout number 2 pointing to it.

Figure : B3EP18PD

Unclip the transponder sensor ( 2 ).

Disconnect the connectors.

Remove :

  • The bolts (1)
  • The steering lock (mark the direction of fitting)

2. Refitting

Parts & tools for this job For 2006 Fiat Ducato

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.