3. Refitting (page 2 of 3)
- Make
- Fiat
- Model
- Ducato Mk3 (250) Factory Service Manual
- Year
- 2006–2017
- Section
- Pivot: overhaul
06 Suspension - 3.0 HDi3. Refitting · page 2 of 3
![A press tool setup showing a blue hub carrier (3) with a bearing (6) being fitted using tools [3] and [4].](/fiat/ducato-2006-2017/assets/page_878_fig01.png)
Figure : B3CP0ESD
Fit the tool [3].
Position the hub carrier (3) on the tool [3].
On the press, fit the bearing (6) fully into place; Using tool [4].
Figure : B3CP0EPD
Fit a new circlip ( 5).
![A press setup showing a hub (4) and pivot (3) being assembled, with tool [5] positioned between them.](/fiat/ducato-2006-2017/assets/page_878_fig03.png)
Figure : B3CP0ETD
Position the hub (4) and the pivot (3) using a press.
Fit the tool [5].
Refit the hub (4) to the stop.
Refit :
Parts & tools for this job For 2006 Fiat Ducato
- TOOLCoil spring compressorSearch: coil spring compressor
- TOOLBall joint separatorSearch: ball joint separator
- PARTShock absorbersSearch: Fiat Ducato 2006 shock absorbers
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.