Workshop Manuals Factory service & repair Fiat
01 01 Engine - 2.2 HDi02 02 Brakes - 3.0 HDi03 03 Engine - 3.0 HDi04 04 Gearbox and clutch - 3.0 HDi05 05 Steering - 3.0 HDi06 06 Suspension - 3.0 HDi07 07 Driveshafts and wheels - 3.0 HDi08 08 Air bags09 09 Audio10 10 Body front section11 11 Body rear section12 12 Body shell13 13 Brakes14 14 Wiring diagrams15 15 Wiring diagrams - supplement16 16 Doors17 17 Electrical units18 18 Fascia and panel assembly19 19 Gearbox20 20 Heating, ventilation and air conditioning21 21 Lighting22 22 Power steering23 23 Roof and headliner24 24 Seats25 25 Side structure26 26 Steering27 27 Suspension28 28 Driveshafts and wheels29 29 Wipers and washers
Fiat Ducato Mk3 (250) Factory Service Manual (2006-2017)06 · 06 Suspension - 3.0 HDi
06 · Steering & suspension

1. Removing

Make
Fiat
Model
Ducato Mk3 (250) Factory Service Manual
Year
2006–2017
Section
Rear stub axle: removing - refitting › 1. Removing
06 Suspension - 3.0 HDi1. Removing

1. Removing

Untighten the wheel screws (rear).
Raise and support the vehicle, with the rear wheels hanging free.
Remove the rear wheels.

Rear wheel hub assembly showing callout numbers 1 and 2 pointing to a bolt and a blue sensor cable respectively

Figure : B3FP7LAD

Remove bolts (1).
Move aside the wheel speed sensor (2).
Remove :

  • The rear hub (see the relevant operation)
  • The parking brake shoes (see the relevant operation)
Parking brake assembly showing callout number 3 pointing to a control lever cable and callout 'a' indicating the connection point

Figure : B3FP7LBD

Uncouple the parking brake control lever cable (3) (at "a").
Remove the parking brake control lever (3).

Parts & tools for this job For 2006 Fiat Ducato

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.