Workshop Manuals Factory service & repair Fiat
Fiat Ducato Mk3 (250) Factory Service Manual (2006-2017)07 · 07 Driveshafts and wheels - 3.0 HDi
07 · Steering & suspension

1. Tooling

Make
Fiat
Model
Ducato Mk3 (250) Factory Service Manual
Year
2006–2017
Section
Driveshafts: removing - refitting › 1. Tooling
07 Driveshafts and wheels - 3.0 HDi1. Tooling · page 1 of 2

ESSENTIAL : Observe the safety and cleanliness recommendations.

1. Tooling

ToolReferenceDesignation
hub immobilising tool [6310-T]

Figure : E5AB06YT		 [6310-T] hub immobilising tool
ball-joint extractor [5707-T]

Figure : E5AG05GT		 [5707-T] ball-joint extractor
locking punch [5709-T.E]

Figure : E5AB0EHT		 [5709-T.E] locking punch

2. Removing

Place the vehicle on a 2-post lift.

Slacken the front wheel bolts.

Disconnect the battery negative terminal.

Lift and support the vehicle.

Remove :

  • The protective panel under the engine
  • The right-hand protector under the engine
  • The front wheel bolts
  • The front wheels

Drain gearbox (see the relevant operation).

Parts & tools for this job For 2006 Fiat Ducato

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.