2. Refitting

Figure : C5JP0DAD

Disconnect the connector of the passenger airbag ( 2) (at "a").

Remove the passenger's airbag (2).

ESSENTIAL : If replacing the airbag : Apply the procedure for destruction of the pyrotechnic components (see the relevant operation). Change the pyrotechnic components after triggering the airbags and the seat belt pretensioners (see the relevant operation).

2. Refitting

Proceed in the reverse order to removal.

Check all the equipment works.

Tighten the bolts (1) to 0,8 m.daN.

CAUTION : Apply the procedure for switching on the central airbag system (see the relevant operation).

ESSENTIAL : Re-initialisation procedure; Using the diagnostic equipment.