1. Preliminary operations

1. Preliminary operations

Remove :

• The bonnet (see the relevant operation)
• The headlamp upper cover (see the relevant operation)

2. Removing

Figure : C4AP1MCD

Remove :

• The bolts (1)
• The bonnet divider (2)

Proceed in identical fashion for the other side.

3. Refitting

Proceed in the reverse order to removal.

Tighten the bolts (1) to 0,8 ± 0,08 daN.m.

Adjust the bonnet's fits and clearances (see the relevant operation).

N.B. : Adjust the bonnet and/or the bonnet opening mechanism If necessary (see the relevant operations).

Check all the equipment works.