1. Preliminary operation
- Make
- Fiat
- Model
- Ducato Mk3 (250) Factory Service Manual
- Year
- 2006–2017
- Section
- Front bumper crossmember: removing - refitting › 1. Preliminary operation
10 Body front section1. Preliminary operation
1. Preliminary operation
ESSENTIAL : Deactivate the pneumatic suspension before lifting the vehicle (2 or 4 post lift, workshop jack or vehicle jack).
Remove the front bumper (see the relevant operation).
2. Removing
Figure : C4AP1M6D
Remove the bolts (1).
Proceed in the same way for the other side.
Remove the front bumper crossmember (2).
3. Refitting
Proceed in the reverse order to removal.
Tighten the bolts (1) to 4 m.daN.
Parts & tools for this job For 2006 Fiat Ducato
- TOOLTrim removal tool kitSearch: trim removal tool kit
- PARTTouch-up paintSearch: Fiat touch up paint
- PARTPanel clip assortmentSearch: Fiat panel clips assortment
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.