10 · Body & interior

1. Preliminary operation (page 2 of 2)

Make: Fiat
Model: Ducato Mk3 (250) Factory Service Manual
Year: 2006–2017
Section: Front bumper: stripping-assembling

‹ Prev 1. Preliminary operation Next › 3. Re-assembling

10 Body front section1. Preliminary operation · page 2 of 2

1. Preliminary operation (page 2 of 2) – diagram from the 10 Body front section chapter of the Fiat Ducato Mk3 (250) Factory Service Manual (2006-2017) factory manual.

A close-up photograph of a front fog lamp assembly mounted in the bumper, with callout numbers 1 and 2 pointing to the lamp and its bolts respectively.

Figure : C5JP0D2D

Remove ( right hand side) :

The bolts (2)
The front fog lamp (1)

Proceed in the same way for the other side.

A view of the front grille area showing multiple callout arrows labeled 'b' indicating fastener locations along the top and bottom edges of the grille, with callout number 3 pointing to the right edge of the grille.

‹ Prev 1. Preliminary operation Next › 3. Re-assembling

Parts & tools for this job For 2006 Fiat Ducato

TOOLTrim removal tool kitSearch: trim removal tool kit
PARTTouch-up paintSearch: Fiat touch up paint
PARTPanel clip assortmentSearch: Fiat panel clips assortment

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.