Workshop Manuals Factory service & repair Fiat
Fiat Ducato Mk3 (250) Factory Service Manual (2006-2017)10 · 10 Body front section
10 · Body & interior

3. Welding (page 2 of 5)

Make
Fiat
Model
Ducato Mk3 (250) Factory Service Manual
Year
2006–2017
Section
Of plastic by welding: repair
10 Body front section3. Welding · page 2 of 5
A close-up photograph showing a yellow hot air gun nozzle applying a blue welding strip into a crack on a white plastic surface.

Figure : C5GM1G7D

N.B. : Use the welding strip corresponding to the type of plastic (see operating instructions).

Fit the hot air gun with the welding nozzle.

Position the strip in the welding nozzle (Bevelled point in the lead).

N.B. : Advance from the drill hole outwards on the full length of the crack Keep advancing as you see the strip starting to melt on the support.

Perform the welding (Bevelled point into the crack).

Parts & tools for this job For 2006 Fiat Ducato

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.