Workshop Manuals Factory service & repair Fiat
01 01 Engine - 2.2 HDi02 02 Brakes - 3.0 HDi03 03 Engine - 3.0 HDi04 04 Gearbox and clutch - 3.0 HDi05 05 Steering - 3.0 HDi06 06 Suspension - 3.0 HDi07 07 Driveshafts and wheels - 3.0 HDi08 08 Air bags09 09 Audio10 10 Body front section11 11 Body rear section12 12 Body shell13 13 Brakes14 14 Wiring diagrams15 15 Wiring diagrams - supplement16 16 Doors17 17 Electrical units18 18 Fascia and panel assembly19 19 Gearbox20 20 Heating, ventilation and air conditioning21 21 Lighting22 22 Power steering23 23 Roof and headliner24 24 Seats25 25 Side structure26 26 Steering27 27 Suspension28 28 Driveshafts and wheels29 29 Wipers and washers
Fiat Ducato Mk3 (250) Factory Service Manual (2006-2017)10 · 10 Body front section
10 · Body & interior

1. Tooling

Make
Fiat
Model
Ducato Mk3 (250) Factory Service Manual
Year
2006–2017
Section
Plastic: repair › 1. Tooling
10 Body front section1. Tooling · page 1 of 3

ESSENTIAL : Observe the safety and cleanliness recommendations.

1. Tooling

N.B. : Refer to the tools catalogue.

Repair kit for plastics.

DesignationMaterial
PPPolypropylene
PAPolyamide
PP-EPDM or P/EEthylene Di-Propylene
ABSAcrylonitrile butadiene styrene

2. Preparing the zone to be repaired

A gloved hand holding a can of cleaning product and a yellow cloth, cleaning a white plastic car component with a hole in it.

Figure : C5JM0LVD

Clean :

  • The component to be repaired using a high pressure washer, then dry it
  • The zone to be repaired, on the inside and outside, using the cleaning product; Using a clean cloth (see operating instructions)

Parts & tools for this job For 2006 Fiat Ducato

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.