7. Adjustment
- Make
- Fiat
- Model
- Ducato Mk3 (250) Factory Service Manual
- Year
- 2006–2017
- Section
- Rear longeron and its crossmembers: replacement › 7. Adjustment
11 Body rear section7. Adjustment · page 1 of 2
Figure 11.
Prepare the mating edges .
Align the mating edges and protect them with a weldable primer.
7. Adjustment
Present the elements, allowing for adjustment.
Check the fits and clearances (see the relevant operation).
Use the approved checking and measuring equipment ..
8. Welding
Figure : C4BP1UFD
Figure 12.
Weld using successive beads (MIG or MAG).
Grind the welds.
Weld with MIG or MAG spot welds (at "b").
Grind the spot welds.
Weld with electric spot welds (at "a").
Parts & tools for this job For 2006 Fiat Ducato
- TOOLTrim removal tool kitSearch: trim removal tool kit
- PARTTouch-up paintSearch: Fiat touch up paint
- PARTPanel clip assortmentSearch: Fiat panel clips assortment
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.