10. Protection

Figure : C4BP1U5D

Figure 23.
Apply a phosphate-print layer on the zone laid bare.
Apply a sealing mastic of type " A4" (see the relevant operation).

Figure : C4BP1U6D

Figure 24.
Apply a phosphate-print layer on the zone laid bare.
Apply a sealing mastic of type " A4" (see the relevant operation).

10. Protection

Paint then spray into the hollow sections, product index C5, in the repair zone (see the relevant operation).

11. Reinitialisation

Reconnect the battery.

ESSENTIAL : Perform the operations to be carried out following reconnection of the battery.