4. Cutting out
- Make
- Fiat
- Model
- Ducato Mk3 (250) Factory Service Manual
- Year
- 2006–2017
- Section
- Rear pillar upper bracket: replacement › 4. Cutting out
11 Body rear section4. Cutting out · page 1 of 2
Figure : C4CP1S7D
Figure 2.
Rear pillar upper bracket.
Mark out then drill 8 mm holes for later plug welding (12 holes).
Prepare the mating edges.
4. Cutting out
Parts & tools for this job For 2006 Fiat Ducato
- TOOLTrim removal tool kitSearch: trim removal tool kit
- PARTTouch-up paintSearch: Fiat touch up paint
- PARTPanel clip assortmentSearch: Fiat panel clips assortment
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.