4. Refitting

On the remains of the bead of sealing adhesive :

• Fit the electric knife [2] with the blade [3]
• Remove the adhesive sealing bead
• Remove any dust using a clean cloth

On the new component :

• Degrease the aperture
• Apply the metal primer provided in the bonding kit part number "A3"
• Allow to dry for 10 mn

4. Refitting

4.1. Reusing the side panel window

Figure : C5CM023D

"A" = 12 mm.

"B" = 8 mm.

Cut the nozzle in triangular section to obtain a bead of sealing adhesive "B" wide and "A" deep.

ESSENTIAL : Always replace : The faulty seals.

Apply the bead of adhesive sealant around the periphery of the glass (3) (at "e") (using tools [4] or [5]).

ESSENTIAL : Use of the two part product: the time for fitting the window on the vehicle and the start of extrusion of the sealing adhesive is 5 minutes.

Refit : The side panel window :

• Using the double hinged suction cups [6]