1. Tooling
- Make
- Fiat
- Model
- Ducato Mk3 (250) Factory Service Manual
- Year
- 2006–2017
- Section
- Dashboard harness: removing - refitting › 1. Tooling
17 Electrical units1. Tooling · page 1 of 2
ESSENTIAL : Observe the safety and cleanliness recommendations.
1. Tooling
| Tool | Reference | Description |
|---|---|---|
| Figure : E5AG02MT | [1350-ZZ] | Stripping tools |
2. Removing
Disconnect the ancillaries battery.
Remove the fascia.
Disconnect the connectors (Built-in systems interface ).
CAUTION : Locate the routing of the electrical harness.
CAUTION : When disconnecting, ensure that the connectors are released correctly; When connecting, check the routing and clipping of the harnesses.
CAUTION : Disconnecting the connectors has to be done without touching the electrical harnesses or the connectors (No pulling of the harnesses is permitted).
Parts & tools for this job For 2006 Fiat Ducato
- TOOLDigital multimeterSearch: automotive digital multimeter
- PARTAssorted fuse kitSearch: car fuse assortment kit
- TOOLWire crimper and connector kitSearch: wire crimper connector kit
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.