3. Refitting

Figure : D6AG05LD

Unplug :

• The Built-in Systems Interface
• The central control unit
• The battery positive cable
• The connectors (at "j") (according to equipment)

Unclip and disconnect (at "k"); Using tool [1350-ZZ].

Unclip the electrical harness (at "h"); Using tool [1350-ZZ].

Disengage then remove the electrical harness (2).

3. Refitting

CAUTION : Replace : The clips securing the electrical harness (2), and any fastenings that are faulty.

CAUTION : Refits the electrical harness following the routing noted before removal.

Refit the electrical harness (2).

Clip :

• The clips retaining the electrical harness (2)
• The wiring harness clamp clips (2)

Connect the connectors.

Proceed in the reverse order to removal.

Reconnect the ancillaries battery.

Check all the equipment works.