5.1. Polishing (page 2 of 2)

Option :

• Use the white disc; Using the polisher
• Increase the flow and quantity of water
• Hold the polisher flat and keep it above the surface to be repaired
• Polish the area (at "b")
• If the polisher begins to bounce, increase the flow of water
• Continue the final polish, until a satisfactory result is achieved

Option :

• Use the foam disc; Using the polisher
• Apply the polishing fluid or powder to the foam disc
• Add a few drops of water to the foam
• Hold the polisher flat and keep it above the surface to be repaired
• Polish the area (at "b")
• Continue the final polish, until a satisfactory result is achieved
• If cloudy marks remain after polishing, Use option 1 to achieve a satisfactory result