1. Deactivation

1. Deactivation

Figure : D1AP03CD

Disconnect the battery negative cable (1).

Protect the cable and the negative terminal in order to prevent any contact.

CAUTION : Wait for at least 5 minutes before performing any operations (discharging of the airbag ECU power reserve).

CAUTION : The ECU must not be removed with the connector still connected under any circumstances.

Disconnect the airbag ECU connector.

2. Activation

ESSENTIAL : The area of the airbags and pyrotechnic seat belts should be kept clear, both of objects and of people.

Ignition off : Connect the airbag ECU connector.

Connect the battery negative cable.

On the driver's side, door open, ignition on, keeping the steering wheel module activation area clear.

Check the system is operating correctly by checking the airbag fault LEDs.

N.B. : After disconnecting the battery, some electronic systems (injection, safety auto-reverse system ... ) need ar