3. Refitting (page 2 of 2)

Figure : C5GG1GYD

Check the positioning (at "h") of the storage box (4).

ESSENTIAL : Replace the harness securing tie-straps.

Proceed in the reverse order to removal.

Apply thread lock to the bolts (1), (2), (8), (12).

Tighten :

• The bolts (1), (2), (8) to 2,4 da.Nm
• The bolts (12) to 4,2 da.Nm

CAUTION : Perform the operations that are required following a reconnection of the ancillaries battery.

Reconnect the ancillaries battery.

Check the electrical operation of the equipment.