3. Re-assembling

Figure : C5GM0BVD

Remove :

• The bolts (34)
• The side trim (33)

3. Re-assembling

ESSENTIAL : Coat the thread of the bolts (25) with thread lock.

CAUTION : Always replace : The fastening ties.

Proceed in the reverse order to removal.

Apply some threadlock on the bolt (13).

Tighten :

• The bolts (2) to 2 da.Nm
• The screw (13) to 4,2 m.daN
• The bolts (25) to 4,2 da.Nm

CAUTION : Perform the operations to be carried out following reconnection of the battery.

Reconnect the battery.

Check the electrical operation of the equipment.