4. Refitting

• Remove the adhesive sealing bead
• Remove any dust using a clean cloth

On the new component :

• Degrease the aperture
• Apply the metal primer provided in the bonding kit part number "A3"
• Allow to dry for 10 mn

4. Refitting

4.1. Reusing the sliding side door window

Figure : C5CM02AD

"A" = 12 mm .
"B" = 8 mm .
Cut the nozzle in triangular section to obtain a bead of sealing adhesive "B" wide and "A" deep.

ESSENTIAL : Always replace : The faulty seals.

Apply a bead of sealing adhesive to the periphery of the sliding side door (3) window (at "e") (using tools [4] or [5]).

ESSENTIAL : Use of the two part product: the time for fitting the window on the vehicle and the start of extrusion of the sealing adhesive is 5 minutes.

Refit : The sliding side door window :

• Using the double hinged suction cups [6]
• Using adhesive tapes (2)

Press gently on the periphery of the sliding side door (3) fixed window.