3. Steering mechanism (page 2 of 2)
- Make
- Fiat
- Model
- Ducato Mk3 (250) Factory Service Manual
- Year
- 2006–2017
- Section
- Power assisted steering: tightening torques
26 Steering3. Steering mechanism · page 2 of 2
Figure : B3EB02UD
| Reference | Designation | Tightening torque |
|---|---|---|
| (1) | nut - Heat shield | 0,6 daNm |
| (2) | Low pressure piping - Low pressure union | 6,3 daNm |
| (3) | Low pressure union - Valve | 3,2 daNm |
| (4) | bolts - Power steering proportional electrovalve | 2,8 daNm |
| (5) | High pressure union - Valve | 2,8 daNm |
| (6) | High pressure piping - High pressure union | 5,5 daNm |
| (7) | nut - Steering ball joint on front hub carrier | 8 daNm |
| (8) | Locknut for adjusting the steering track rods | 7 daNm |
| (9) | bolts - Steering mechanism | 11 daNm |
Parts & tools for this job For 2006 Fiat Ducato
- TOOLTie rod end toolSearch: tie rod end puller
- TOOLBall joint separatorSearch: ball joint separator
- FLUIDPower steering fluidSearch: Fiat power steering fluid
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.