3. Refitting

Position the tool [4] in the front pivot opening.

Turn a quarter turn to open the pivot.

Uncouple the front pivot (16).

Remove the front pivot (16).

Remove the tool [4].

3. Refitting

Position the tool [[4]] in the front pivot opening.

Turn a quarter turn to open the pivot.

Engage the front pivot (16) on the suspension leg.

Refit bolt (13).

Remove the tool [4].

Tighten the bolt (13) to 12 ± 0,4 daN.m.

Position the ball-joint housing (12).

Refit the bolts (11).

Tighten the bolts (11) to 11,5 ± 0,4 daN.m.

Refit :

• The silentblock (15)
• The washer (14)
• The nut (9)

Couple up the steering ball-joint (8).

Refit the nut (7).

Tighten the nut (7) to 8 ± 0,7 daN.m.

Refit the driveshaft nut (6).

Immobilise the hub from rotation using tool [1].

Tighten the driveshaft nut : 47,5 ± 4,75 daNm.

Remove the tool [1].