3. Refitting

Figure : B3CP0BFD

Slacken the bolts (9).

Remove :

• The bolts (9)
• The front lower suspension arm (10)

Remove the nut (3).

Uncouple the ball joint; Using tool [1].

3. Refitting

N.B. : Always fit new Nylstop nuts.

Couple the ball-joint to the front lower suspension arm (10).

Refit :

• The nut (3)
• The lower front suspension arm (10) by engaging the anti-roll bar rod
• The bolts (9) (without tightening)
• The 3 bolts (8)

Tighten the bolts (8) to 11,5 ± 0,4 daN.m.

Refit (left and right hand sides) :

• The silentblock (7)
• The washer (6)
• The nut (5)

Tighten the nut (3) to 15 ± 0,5 daN.m.

Couple up the steering ball-joint (2).

Refit the nut (1); Tighten to 8 ± 0,7 daN.m.