3. Refitting

Position the pivot (3) using a press; Insert a 5 mm shim at "a" (at "a").

Fit the tool [2].

Extract the bearing using a press.

3. Refitting

ESSENTIAL : Use a new hub bearing and new circlip; Oil the bearing housing in the pivot and the hub itself; All parts must be clean and free from any of traces of abnormal wear or damage.

ESSENTIAL : Do not place a bearing with integrated magnetic wheel near a magnetic source or a source of contamination by metallic particles.

Figure : B3CP0ERD

" b" : Face of the bearing with integrated magnetic wheel.

CAUTION : Fit the bearing face " b" towards the driveshaft.