2. Refitting

• The bolts (4)
• The backplate (5)

Figure : B3DP0DMD

Remove :

• The bolts (6)
• The bracket (7)
• The bolts (8)
• The stub axle (9)

2. Refitting

Refit :

• The stub axle (9)
• The bolts (8); Tighten to 20 ± 2 daN.m

Refit :

• The bracket (7)
• The bolts (6) (new) (pre-coated with a thread locking product)

Tighten the bolts (6) to 20 ± 2 daN.m.

Refit :

• The backplate ( 5)
• The bolts (4); Tighten to 2,5 ± 0,2 daN.m

Refit the parking brake control lever (3).

Couple the parking brake control lever cable (3) (at "a").

Refit :

• The parking brake shoes (see the relevant operation)
• The rear wheel sensor (2)