2.5. Air union

(24) Pneumatic suspension spring .
Composition of a pneumatic spring :

• "f" Pneumatic spring winder piston
• "g" Pneumatic spring diaphragm
• "h" Pneumatic spring upper support
• "j" Pneumatic union

Pressure in the pneumatic springs at the reference level : Approximately 7,3 bars.

2.5. Air union

Figure : B3BM02CD

(25) Air union "Voss" :

• (25a) Union screw
• (25b) Oval-shaped handle

ESSENTIAL : The removal operation renders the union useless. Always replace the union each time the pneumatic suspension circuit pipes are uncoupled.

CAUTION : When fitting the pipe, only the mark "k" should remain visible (the mark "l" corresponds to the minimum pressing of the pipe).

3. Suspension geometry

N.B. : The geometry specifications are given with the values for checking and adjusting the axle geometries.