Internal tailgate moulding (one) - r+r

Operation 7015A58 · Tailgate assembly

Removing

- 7015A04 tailgate interior panel - r+r.

1. Open the tailgate and prise off the covers.

2. Undo the bolts.

3. Move the top moulding over slightly.

4. Disconnect the connector on the third stop light.

1. Undo the side moulding bolts.

2. Prise off the side mouldings from the internal retainers using the appropriate tool.

Refitting

Check that the mouldings are not damaged and that the retainers are intact and correctly positioned.

Fit the side mouldings and tighten the bolts.

Connect the connector to the third stop light on the top moulding.

Fit the top moulding and tighten its bolts.

Fit the covers.

- 7015A04 tailgate interior panel - r+r.