Steering angle sensor r r

Operation 3350E20 · Vehicle direction control system vdc

Removing

Disconnect the battery leads and insulate them.

Wait at least 10 minutes before continuing.

- 5580C18 air bag module - r+r

Before working on the Air Bag system, follow the Safety Instructions for working on the system (See 5580C - Air Bag System - Precautions).

- 4110A11 steering wheel - r+r for replacement or check for versions with air bag

- 7040A26 steering column trim - r+r

- 5580C12 clock spring for air bag module on steering wheel r r

Closely observe the Safety Regulations established for this operation.

1. Working from underneath, disconnect the electrical connection 91a) from the steering angle sensor (1b).

1. Undo the fixing bolts (1a) and remove the sensor (1b) from the steering column switch unit.

Refitting

Position the steering angle sensor and tighten the fixing bolts.

Connect the sensor electrical connection.

- 5580C12 clock spring for air bag module on steering wheel r r

- 7040A26 steering column trim - r+r

- 4110A11 steering wheel - r+r for replacement or check for versions with air bag

- 5580C18 air bag module - r+r

Connect the battery leads.