(PUMP) - MASTER CYLINDER R.R.

Operation 3330C10 · Brake pump, reservoir and load proportioning valve

Removing

- 1048A10 air cleaner filtering element - replace

- 5530B10 battery - r+r

Open the brake fluid reservoir cap.

Using a syringe, remove the brake fluid from the reservoir.

1. Disconnect the flexible supply and return pipes (1a) from the press fittings (1b) on the master cylinder.

2. Using a spanner (2a), undo the connectors (2b) for the rigid pipes from the master cylinder.

3. Undo the nuts fixing the master cylinder to the brake servo.

4. Remove the master cylinder.

Refitting

Positin the master cylinder on the brake servo.

Tighten the nuts fixing the master cylinder to the brake servo.

Connect the rigid pipes to the master cylinder and, using a special spanner, tighten the nuts for the connectors.

Connect the reservoir flexible supply and return pipes which are a press fit on the master cylinder.

- 3330A10 BRAKE FLUID - Check level and top up, if necessary.

- 5530B10 battery - r+r

- 1048A10 air cleaner filtering element - replace