Rpm sensor coil operation check
- Make
- Fiat
- Model
- Multipla Factory Service Manual
- Year
- 1998–2010
- Section
- Engine ignition › Rpm sensor coil operation check
Electrical equipmentRpm sensor coil operation check
Rpm sensor coil operation check
- Disconnect the electrical connection for the control unit side sensor and leave it disconnected.
- Connect the sensor side connection to isolator AD 233 N° 180.63.87.000.
- Connect using the probes between pins 1 and 2 of the isolator and check that the coil resistance is between 880 and 1320 Ohm at 20 °C.
Parts & tools for this job For 1998 Fiat Multipla
- TOOLOBD2 scannerSearch: OBD2 scanner
- TOOLDigital multimeterSearch: automotive digital multimeter
- TOOLBack-probe test leadsSearch: back probe test leads
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.