Workshop Manuals Factory service & repair Fiat
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Fiat Multipla Factory Service Manual (1998-2010)08 · Engine
08 · Engine

Engine oil filler - r r

Make
Fiat
Model
Multipla Factory Service Manual
Year
1998–2010
Section
Engine lubrication system › Engine oil filler - r r
EngineEngine oil filler - r r

Engine oil filler - r r

Operation 1084A22 · Indicators/check devices

1.6 16v

Removing

1. Undo the oil filler fitting bolts.

2. Open the clips (1a) and disconnect the pipes (1b).

3. Remove the filler fitting and recover the lower seal.

Engine oil filler - r r

Refitting

Replace the lower fitting seal.

Fit the filler fitting into its seat and insert the lower end into the oil vapour separator.

Tighten the bolts.

Connec the pipe and secure using a new collar.

Parts & tools for this job For 1998 Fiat Multipla

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.