Multifunctional valve r r

Operation 1080E11 · Evaporation control system

1.6 16v

Removing

- 4450B11 WHEEL (one) rear - R.R.

Raise the car.

1. Unscrew the retaining bolts.

2. Remove the fuel filler pipe plastic protection.

1. Unscrew the fuel filler fitting retaining bolts.

2. Lower the upper section of the filler pipe as far as possible and disconnect the pipe from the multifunction valve.

3. Undo the bolts securing the separator to the filler fitting.

4. Turn the multifunction valve anticlockwise and remove.

Refitting

Fit the multifunction valve to the separator.

Screw in clockwise in order to secure to the separator.

Connect the pipe to the valve.

Fit the filler fitting in its seat and secure using bolts.

Refit the filler pipe plastic protection.

Lower the vehicle.

- 4450B11 WHEEL (one) rear - R.R.