4410 front suspension
- Make
- Fiat
- Model
- Multipla Factory Service Manual
- Year
- 1998–2010
- Section
- 44 suspension and wheels › 4410 front suspension
Tightening torques4410 front suspension
4410 FRONT SUSPENSION
| Component | Fastening | Ø | Value (daNm) | Validity |
|---|---|---|---|---|
| ENGINE OR ROD ANCHORAGE BEAM | Bolt | M12 x 1.25 | 12 | 1.9 JTD 8V |
| ENGINE OR ROD ANCHORAGE BEAM | Bolt | M12 x 1.25 | 15.2 | |
| FRONT ANTI-ROLL BAR. ANCHORAGE ROD. | Nut | M10 x 1.25 | 6 | 1.6 16v 1.9 JTD 8V |
| FRONT ANTI-ROLL BAR. ANCHORAGE ROD. | Nut | M10 x 1.25 | 7 | |
| FRONT ANTI-ROLL BAR | Nut | M10 x 1.25 | 7 | 1.9 JTD 8V |
| FRONT DAMPER TOP ATTACHMENT | Bolt | M8 | 4 | 1.6 16v 1.9 JTD 8V |
| FRONT DAMPER | Nut | M12 x 1.25 | 8.5 | 1.6 16v 1.9 JTD 8V |
| FRONT SUSPENSION LOWER LEVER BALL JOINT | Bolt | M10 x 1.25 | 7 | 1.9 JTD 8V |
| FRONT SUSPENSION LOWER LEVER BALL JOINT | Nut | M10 x 1.25 | 7 | |
| FRONT SUSPENSION LOWER LEVER | Bolt | M10 x 1.25 | 7.5 | |
| HANDBRAKE LEVER | Bolt | M8 | 2.8 | |
| INTERMEDIATE FRONT SUSPENSION BEAM | Bolt | M10 x 1.25 | 9 | BIPOWER BLUPOWER |
| INTERMEDIATE FRONT SUSPENSION BEAM | Bolt | M12 x 1.25 | 12 | 1.9 JTD 8V |
Parts & tools for this job For 1998 Fiat Multipla
- TOOLCoil spring compressorSearch: coil spring compressor
- TOOLBall joint separatorSearch: ball joint separator
- PARTFront shock absorbersSearch: Fiat Multipla 1998 front shock absorbers
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.