44 Suspension and wheels (Front suspension): Tightening torques
- Make
- Fiat
- Model
- Panda (141) Factory Service Manual
- Year
- 1986–2003
- Section
- Tightening torques › Front suspension
44 Suspension and wheelsFront suspension
FRONT SUSPENSION
| DESCRIPTION | thread size | Torque daNm | |
|---|---|---|---|
| Wheel nuts | M 12 x 1,25 | 8,6 | |
| Wheel bearing fixing, nut (to be staked) | M 20 x 1,5 | 21,6 | |
| Hub with bearing and brake back plate to steering knuckle fixing, bolt | M 10 x 1,25 | 6,4 | |
| Track control arm bodywork fixing, nut | M 10 x 1,25 | 4,4 | |
| Front suspension ball joint to track control arm fixing, nut | M 10 x 1,25 | 3,4 | |
| Front suspension upper shock absorber flexible mounting fixing, nut | M 8 | 2,5 | |
| Shock absorber to steering knuckle fixing, nut | M 10 x 1,25 M 12 x 1,25 (*) | 6,6 12,3 (*) | |
| Front suspension upper shock absorber fixing, nut for bolt | M 10 x 1,25 | 2,5 | |
| Reaction rod to front suspension track control arm fixing, nut for bolt | M 12 x 1,25 | 6,9 | |
| Reaction rod to mounting fixing, nut for bolt | M 12 x 1,25 | 6,9 | |
| Reaction rod to front suspension track control arm attachment bracket fixing, bolt | M 8 | 1,5 | |
| Reaction rod mounting to bodywork fixing, bolt | M 10 x 1,25 | 3,9 | |
| Front brake caliper mounting fixing, bolt | M 10 x 1,25 | 5,3 | |
| Front wheel cylinder bleed screw | M 8 | 0,64 | |
| Front brake pipe union | 3/8-24UNF-2A | 2,7 | |
| Steering lever to front shock absorber fixing, nut | M 8 | 2,5 | |
| Front brake pipe to caliper union (*) | cast iron | M 10 x 1 | 1,6 |
| aluminium | M 10 x 1 | 1,1 |
(*) Panda 4x4 version
Parts & tools for this job For 1986 Fiat Panda
- TOOLCoil spring compressorSearch: coil spring compressor
- TOOLBall joint separatorSearch: ball joint separator
- PARTFront shock absorbersSearch: Fiat Panda 1986 front shock absorbers
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.