WINDSCREEN - Removing penetration

Make

Fiat

Model

Panda Factory Service Manual

Year

2003–2012

Section

Bodyshell windows › WINDSCREEN - Removing penetration

Body fittingsWINDSCREEN - Removing penetration

WINDSCREEN - Removing penetration

Operation 7035A04 · Windscreen

1. Wet with soapy water the external area where the leak occurs.

2. Blow compressed air from inside and identify the point of the leak.

If the leak is small, seal the relevant part from the inside and wait for the sealant to dry. Then repeat the test.

If the penetration point is too large, remove and refit the windscreen as described in the procedure:

Refer to op. 7035A18 windscreen glass r r including cleaning of housing

18 Body & interior