Lateral acceleration/yaw sensor check
- Make
- Fiat
- Model
- Panda Factory Service Manual
- Year
- 2003–2012
- Section
- Drive control › Lateral acceleration/yaw sensor check
BrakesLateral acceleration/yaw sensor check
LATERAL ACCELERATION/YAW SENSOR CHECK
Check that there is a reference supply of 5 V at pin 1.
Check that there is a power supply of 12 V at pin 3.
Check that there is earth at pin 6.
Check that the sensor output voltage at pins 4 and 5 is between 0.3 and 4.7 V.
| PIN CONFIGURATION | |
|---|---|
| Pin 1 | 5 V (reference power supply) |
| Pin 2 | Test signal |
| Pin 3 | 12 V power supply |
| Pin 4 | Slewing signal |
| Pin 5 | Lateral acceleration signal |
| Pin 6 | Earth |
Parts & tools for this job For 2003 Fiat Panda
- TOOLOBD2 scannerSearch: OBD2 scanner
- TOOLDigital multimeterSearch: automotive digital multimeter
- TOOLBack-probe test leadsSearch: back probe test leads
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.