Starter motor - r+r

Operation 5520B10 · Starter motor and components

1.1, 1.2 8v

Removing

Place the car on a lift.

Disconnect the battery negative terminal.

Raise the car.

1. Open the protective cover.

2. Undo the fixing nut (2a) and disconnect the starter motor electrical wiring (2b).

3. Undo the fixing bolts (3a) of the starter motor (3b) and remove it.

Refitting

Fit the starter motor in place and tighten the fixing bolts to the recommended torque.

Close the starter motor wiring protective cover.

Lower the vehicle.

Connect the battery negative terminal.

Remove the vehicle from the ramp.