Workshop Manuals Factory service & repair Fiat
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Transmission (4x4)12 Axles and driveshafts13 Brakes14 Steering15 Suspension and wheels16 Heating, air conditioning and auxiliary units17 Electrical equipment18 Body fittings19 Body panels and frame20 Wiring diagrams and electrical functions21 Wiring harnesses22 Connectors and pin-outs23 Fault diagnosis24 Special tools
Fiat Panda Factory Service Manual (2003-2012)23 · Fault diagnosis
23 · Diagnostics

Noisy sunroof

Make
Fiat
Model
Panda Factory Service Manual
Year
2003–2012
Section
Noisy'' / vibrations › Noisy sunroof
Fault diagnosisNoisy sunroof

NOISY SUNROOF

The sun roof is noisy during opening/closing and/or whilst driving

Results of the tests
0PRELIMINARY CHECKAll OKProblems metOperation
Check that the noise only occurs during the opening/closing of the roof and is not there whilst driving with the roof closed.Continue to Step 2The noise is also present whilst driving with the roof closed.Continue to Step 1
1PROFILE CHECKAll OKProblems metOperation
Check that the profile between the front moving glass and the rear fixed glass is correctContinue to Step 2Profile not correctRestore correct coupling
2SLIDES CHECKAll OKProblems metOperation

Check the condition of the slides; in particular, make sure that:

  • there are no obstacles or impediments to the movement of the slides
  • the splining on the slides are properly greased
  • the matching between the splining and the pins for the hinged opening is correct
Continue to Step 3Presence of impediments/obstaclesRestore correct operation
Splining not greasedGrease the splining
Faulty match between slide componentsRestore correct operation, if necessary, replace the damaged slide
3MOTOR TIGHTENING CHECKAll OKProblems metOperation
Check that the bolts fixing the motor are correctly tightened using a torque wrenchContinue to Step 4Tightening not correct/incompleteTighten the bolts to the correct torque
4MOVEMENT CONTROL CONDITION CHECKAll OKProblems metOperation
Check the condition of the control racks and the motor ring gearContinue to Step 5Rack faultyRestore correct operation, if necessary replace the rack Op. 7030B45
Motor ring gear faultyRestore correct operation, if necessary replace the motor Op. 7030B70
5CHECK ON CORRECT OPERATIONAll OKProblems metOperation
Check that the fault is no longer presentEnd of diagnosisFault persistsReplace the sun roof electric motor Op. 7030B70

Parts & tools for this job For 2003 Fiat Panda

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.