1072 inlet and exhaust manifolds
- Make
- Fiat
- Model
- Panda Factory Service Manual
- Year
- 2003–2012
- Section
- 10 engine › 1072 inlet and exhaust manifolds
Tightening torques1072 inlet and exhaust manifolds
1072 INLET AND EXHAUST MANIFOLDS
| Component | Fastening | Ø | Value (daNm) | Validity |
|---|---|---|---|---|
| EXHAUST MANIFOLD/S | Nut | M8 | (Cylinder head side) 2.1 ÷ 2.5 | 1.3 JTD |
| EXHAUST MANIFOLD/S | Nut | M8 | (Lower cylinder head side) 2.1 ÷ 2.5 | 1.3 JTD |
| EXHAUST MANIFOLD/S | Nut | M8 | (Exhaust manifold) 2.7 | 1.1 |
| EXHAUST MANIFOLD/S | Bolt | M8 | (Mounting bracket) 2,5 | 1.1 1.2 8v |
| EXHAUST MANIFOLD/S | Nut | M8 x 1.25 | (cylinder head) 2.5 | 1.1 1.2 8v |
| EXHAUST MANIFOLD/S | Nut | M8 x 1.25 | 2.5 | 1.1 1.2 8v |
| EXHAUST MANIFOLD/S | Nut | M10 x 1.25 | 4 | 1.1 1.2 8v 1.3 JTD |
| EXHAUST MANIFOLD/S | Nut | M8 x 1.25 | 2.5 | |
| INLET AIR DUCT | Bolt | M8 | (Cylinder head side) 2.3 ÷ 2.8 | 1.3 JTD |
| INLET MANIFOLD | Nut | M8 | (Inlet manifold) 2.7 | 1.1 |
| INLET MANIFOLD | Nut | M8 x 1.25 | 2.7 | 1.1 1.2 8v |
| LH MANIFOLD HEAT SHIELD BULKHEAD | Bolt | M6 | (Exhaust manifold) 0.9 | 1.1 1.2 8v |
| PROTECTION COVER GUARDS/SUPPORTS | Bolt | 0,9 - 1,2 | 1.1 1.2 8v |
Parts & tools for this job For 2003 Fiat Panda
- PARTExhaust gasketSearch: Fiat Panda 2003 exhaust gasket
- TOOLPenetrating oilSearch: penetrating oil
- TOOLOBD2 scannerSearch: OBD2 scanner
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.