4410 front suspension
- Make
- Fiat
- Model
- Panda Factory Service Manual
- Year
- 2003–2012
- Section
- 44 suspension and wheels › 4410 front suspension
Tightening torques4410 front suspension
4410 FRONT SUSPENSION
| Component | Fastening | Ø | Value (daNm) | Validity |
|---|---|---|---|---|
| FRONT SHOCK ABSORBERS (S.M.) | Nut | M10 X 1.25 | 7.5 | 1.1 1.2 8v 1.3 JTD |
| FRONT SHOCK ABSORBERS (S.M.) | Nut | M12 X 1.25 | 4.5 | 1.1 1.2 8v 1.3 JTD |
| FRONT ANTI-ROLL BAR | Bolt | M10x1.25 | (Links) 5 | 1.1 1.2 8v 1.3 JTD |
| FRONT ANTI-ROLL BAR | Bolt | M8 | (Beam) 2 | 1.1 1.2 8v 1.3 JTD |
| LOWER FRONT TRACK CONTROL ARMS | Bolt | M12 X 1.25 | (Crossmember side) 12 | 1.1 1.2 8v 1.3 JTD |
| FRONT SUSPENSION SUBFRAME | Bolt | M12 X 1.25 | (front) 8 + 50°-250° | 1.1 1.2 8v 1.3 JTD |
| REAR SUSPENSION FRAME | Bolt | M14 x 1.25 | (rear) 9 + 50°-200° | 1.1 1.2 8v 1.3 JTD |
| FRONT LOWER WISHBONE ARTICULATED HEAD | Nut | M8 | 3.2 | 1.1 1.2 8v 1.3 JTD |
| FRONT SUSPENSION SUBFRAME | Bolt | M14x1.5 | (rear) 16 | 1.2 8v 4x4 1.3 JTD 4x4 |
Parts & tools for this job For 2003 Fiat Panda
- TOOLCoil spring compressorSearch: coil spring compressor
- TOOLBall joint separatorSearch: ball joint separator
- PARTFront shock absorbersSearch: Fiat Panda 2003 front shock absorbers
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.