Wheel geometry
- Make
- Fiat
- Model
- Punto (176) Factory Service Manual
- Year
- 1993–1999
- Section
- Automatic gearbox (Selecta, 1242 SPI) › Wheel geometry
00 Introduction and technical dataWheel geometry · page 1 of 3
unladen car (*)
WHEEL GEOMETRY
| Front suspension |
camber (**) | -0°25' ± 30' |
| caster (**) | 1°20' ± 30' | |
| toe in | -1 ÷ 1 mm | |
| Rear suspension |
camber (**) | -0°25' ± 30' |
| toe in (**) |
-1 ÷ 3 mm |
(*) With tyres inflated to the correct pressure and vehicle in running order
(**) Angles cannot be adjusted
Parts & tools for this job For 1993 Fiat Punto
- PARTTransmission filter kitSearch: Fiat Punto 1993 transmission filter kit
- FLUIDAutomatic transmission fluidSearch: Fiat automatic transmission fluid
- TOOLFluid transfer pumpSearch: fluid transfer pump
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.