Workshop Manuals Factory service & repair Fiat
Fiat Punto (176) Factory Service Manual (1993-1999)01 · 00 Introduction and technical data
01 · General

Identification data

Make
Fiat
Model
Punto (176) Factory Service Manual
Year
1993–1999
Section
Contents (1108 SPI, Eastern Europe) › Identification data
00 Introduction and technical dataIdentification data

IDENTIFICATION DATA

Table showing identification data for chassis ZFA 176.000, engine 176 A6.000, versions 176 AH 55 F and 176 AH 55 P with trim levels S 55 and SX 55, available on 5 door models with 5 speed gearbox.
CHASSIS ENGINE VERSION TRIM LEVEL 3 DOOR 5 DOOR GEARBOX
5 speed 6 speed
1108
SPI		 ZFA 176.000 176 A6.000 176 AH 55 F S 55 ● ●
176 AH 55 P SX 55 ● ●

WEIGHTS (in kg)

Diagram illustrating vehicle weights: kerb weight 865/875 (*) with +450 kg payload equals 1315/1325 (*); front axle max load 700; rear axle max load 700; roof max load 75; tow hook min - / max 70 (with braking system); without braking system 400; with braking system 900.
865/875 (*)
+450 = 1315/1325 (*)
Maximum permissible loads on the axles ■ 700
700
Maximum permissible load on the roof 75
Maximum load on the tow hook
(trailer with braking system)		 Minimum -
Maximum 70
Without braking system 400
With braking system 900

■ Loads which must never be exceeded

NOTE FOR VERSIONS WITH ACCESSORIES:Where there is special equipment (non standard air conditioner, sun roof, trailer towing device), the kerb weight increases and therefore the carrying capacity may decrease in relation to the maximum permissible loads.

(*) The first figure refers to the vehicle without optional equipment; the second, complete with optional equipment.

Original page

Parts & tools for this job For 1993 Fiat Punto

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.